Dell V310-v510 Printer Driver For Mac Latest

By Gerld

Dell V310-v510 Printer Driver For Mac Install Update

Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and names of their products. Understanding the parts of the printer Cleaning the exterior of the printer Refer service or repairs, other than those described in the user documentation, to a professional service person. To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding.

These features clean the printhead nozzles to improve the quality of your prints. To return an empty ink cartridge, go to www. Installation software CD Note: If you purchased your Dell computer and printer at the same time, then documentation and drivers for your printer are already installed on your computer.

Understanding the parts of the printer Use the Paper support Load paper. Wi-Fi indicator Check wireless status.

This feature is available in selected models only. Card reader light Check card reader status. The light blinks to indicate that a memory card is being accessed.

Scan and copy photos and documents. Security slot Install an anti-theft cable on your printer. Power supply with port Connect the printer to a power source. Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out.

Turn on your printer. Color cartridge Color cartridge, high yield Licensed for a single use only. After use, return this cartridge to Dell for remanufacturing, refilling, or recycling.

To know more about recycling Dell products, visit www. Available only on the Dell Web site at www. To return Dell products to Dell for recycling: Click All Programs or Programs, and then select the printer program folder from the list. Choose your printer from the printer drop-down list. Click Order supplies in the Maintenance tab. Using the printer control panel buttons and menus Using the printer control panel The following diagrams explain the sections of the printer control panel: The display is turned off in Power Saver mode.

This menu appears only when there is a valid DPOF file in your memory device. This menu appears only when a memory device is inserted into the card slot or USB port. The File Print menu is enabled when you insert a memory device that contains document files into the printer. The menu is composed of the folders and files stored on the memory device.

Changing the Power Saver timeout The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left idle.

The Power Saver feature optimizes energy efficiency by reducing the printer power consumption as much as 28 percent on some printer models compared to the default printer settings. Press the arrow buttons to scroll to Set Defaults, and then press Press the arrow buttons to scroll to Use Factory, and then press When prompted to set the initial settings of your printer, make your selections using the printer control panel buttons. Press the arrow buttons to scroll to Eco-Mode.

Select the Eco-Mode setting, and then press Press until you exit Setup, or press another mode button. Using the printer control panel buttons and menus Software installed during printer installation When you set up the printer using the installation software CD, all the necessary software was installed. You may have chosen to install some additional programs. The following table provides an overview of various software programs and what they can help you do.

Your printer may not come with some of these programs or some of the functions of these programs, depending on the features of the printer that you purchased. View, manage, and edit photos. Reinstalling the printer software If you encountered problems while installing, or if your printer does not appear in the Printers folder or as a printer option when you send a print job, then try removing and reinstalling the printer software. Adjust the paper guides so they rest against the edges of the paper.

Do not force paper into the printer. The paper should be flat against the paper support, and the edges should be flush against both paper guides. You can set the default paper size, paper type, and photo print size for the documents and photos that you print. These default settings apply only to print, copy, and scan jobs that you initiate from the printer.

From the printer control panel, press Choose the default settings: Press the arrow buttons to select the default photo print size for the printer, and then press Press until you exit Setup, or press another mode button. The collate option is available only when you are printing multiple copies. If only document files are stored on the memory device, then the printer automatically switches to File Print mode.

If document files and image files are stored on the memory device, then press to select Documents. Press the arrow buttons to select the file name of the document that you want to print.

Press , and then wait for the printer to connect to the network computer or to finish searching the network for available computers. The printer prints the odd-numbered pages and the instruction sheet. Flip and reload the paper, following the directions on the instruction sheet to complete the print job. Memory cards and flash drives are storage devices frequently used with cameras and computers. You can remove the memory card from the camera or the flash drive from the computer and insert it directly into the printer.

Insert a memory card into the card slot or a flash drive into the USB port. From the printer control panel, press Insert a memory card, flash drive, or digital camera set to mass storage mode. Fast Pics launches automatically when you insert the memory device.

Follow the instructions on the computer screen to transfer the photos to the computer or to print. If the printer is using a Wireless connection selected models only Press the arrow buttons to scroll to Select Computer, and then press See the documentation for your camera to begin printing. If you insert the camera while the printer is performing another job, then wait for the job to finish before printing from the camera.

Printing photos from a memory device using the proof sheet Load letter- or A4-size plain paper. From the printer control panel, press Insert a memory card or flash drive. Press the arrow buttons to scroll to Proof Sheet, and then press Press the arrow buttons to select an option to print a proof sheet. The printer does not support printing files from your computer using a Bluetooth connection.

You need to set up a connection between a Bluetooth-enabled device and your printer if you are sending a print job from the Bluetooth device for the first time.

You will need to repeat the setup if: You need to set up a connection for each Bluetooth device that you use to send a print job to the printer.

To set up a connection between the printer and a Bluetooth-enabled device: Managing print jobs Setting your printer as the default printer Your printer should be selected automatically from the Print dialog when you send a print job.

If you have to manually select your printer, then it is not the default printer. If you want to resume a particular print job, then right-click the document name, and then select Resume. The ADF is available only on selected models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass.

For best results with this resize setting, use photo paper and set the paper type to Photo, or let the printer automatically detect the paper type. Repeat steps 8 and 9 until all the pages that you want to copy have been saved to the printer memory.

When asked if you want to scan another page, press the arrow buttons to scroll to No, and then press printing the copies. Repeat steps 7 and 8 until all the pages that you want to copy have been saved to the printer memory.

When asked if you want to scan another page, press the arrow buttons to scroll to No, and then press printing. Remove the paper from the paper exit tray, and then reload the paper to print the other side of the document. Press Canceling copy jobs To cancel a copy job, press Scanning stops and the printer returns to the previous menu.

You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad. Press to start scanning. The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved. Scanning photos into an editing application Using the printer control panel Load the photo or photos facedown on the scanner glass. Repeat steps 9 and 10 until all the photos that you want to scan are saved to the printer memory. When asked if you want to scan another page, press the arrow buttons to scroll to No, and then press The scan is complete when the photo editing application you selected in step 6 opens on the destination computer, and the scan appears within the application as a new file.

Use a high resolution. How do I scan in black and white? Color is the default for all scans.

Dell V310-v510 Printer Driver For Mac

Dell V310-V510 Series

Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and names of their products. Understanding the parts of the printer Cleaning the exterior of the printer Refer service or repairs, other than those described in the user documentation, to a professional service person. To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding. These features clean the printhead nozzles to improve the quality of your prints. To return an empty ink cartridge, go to www.

Dell V310-V510 Series Printers Drivers Free Download

Dell V310-v510 Printer Driver For Mac

To start the conversation again, simply ask a new question. Could anyone tell me how to I can get a Dell V series all in one printer installed and working on my mac? I found one link for some lexmark drivers that supposedly work for this, but after installing them it didn't seem to have any effect. Posted on Sep 4, 6: This solution worked for me. Downloaded the driver, it installed, and I had no problems. Just want to note that my printer was already setup on my WiFi, just needed to give my Mac access to it. Posted on Apr 13, 8: Sep 18, That's a helpful link to have, but for some reason or another it didn't work. I then highlighted it and when I did so in the field bellow which lists "Name: Dell VV" and "Location:

0 thoughts on “Dell V310-v510 Printer Driver For Mac

Leave a Reply

Your email address will not be published. Required fields are marked *